Concrete floor installation in Ridgecrest CA - a level slab ready for tile or carpet
Need a concrete floor for an addition, shop or room? We prep the ground first and pour a slab your flooring can sit on.
The owner comes out and runs it
I come out to look at your floor and give the estimate myself. Our own crew does the work, and I run it on site, so the person who priced your job is the one watching the base go in.
In business since 2017
I learned concrete as a helper on a small crew, hauling forms and pouring slabs, before starting this business in 2017. Nine years in, we're best known for doing the slow work under the concrete right, so the floor sits flat.
Licensed and fully insured, questions welcome
We're licensed and fully insured. Nobody should feel rushed or silly asking how a floor gets built, and I'd rather explain a step twice than have you guess. Call (442) 294-1117 or use the form to set a time for me to come out.
Concrete floor installation in Ridgecrest
Concrete floor installation is forming, pouring and finishing a flat slab that becomes the floor of a room, addition or shop, usually with tile, carpet or a coating over it. We pour them for Ridgecrest homeowners who want a floor that's solid, flat and ready for that next layer.
Most calls start with a plan, like an addition, a shop or a room that needs a floor, and the first questions are what the floor will carry and what goes on top. Tile, carpet and coatings each need the slab ready in their own way, so I want to know your flooring plans before we talk about the pour.
Price moves with the floor's size, how much digging and base work the ground needs, how easy the spot is to reach and whether an old slab comes out. The schedule turns on that ground work, pour-day weather and drying time. Some of it I can't know until the ground's open, and I'll say so. You get your figure at the estimate, and if your job needs a permit, I'll tell you then and we'll pull it before work starts.
Concrete floors, from the ground work to the finish
Base work comes before the concrete
With an indoor floor we put as much effort into the base as into the concrete, because a slab on poorly prepared ground is far more likely to fail no matter how it's reinforced. We dig out to firm ground and pack the base solid rather than raking loose dirt level. It's the part nobody sees once the floor is in, and the first place budgets get cut, so I'd trim a fancy finish before I'd trim the base. It's the same care we put under concrete pool decks and concrete steps.
Pour timing, joints and curing
Concrete gives you a short window to finish, cut joints and start curing, and missing it can leave cracks, a dusty or flaking top, or high and low spots. So we plan the pour for the cooler part of the day and take extra care when it's sunny and windy, since wind makes heat and dry air much harder on fresh concrete. We cut control joints, shallow grooves that give the slab a chosen place to crack, before it cracks on its own, then keep it damp so it gains strength slowly instead of drying out too fast.
Vapor barrier and drying time
Ground moisture rises into a slab, so we lay a vapor barrier, a plastic sheet that keeps it out, under the concrete, and the concrete industry's floor guide says flooring gets the most protection when that barrier sits right against the slab. Then there's the wait. A new slab holds a lot of water, and we talk through drying time with you so your flooring doesn't go down too soon. If you've booked a flooring installer, bring that date to the estimate and we'll plan around it.
Get a price on your concrete floor
We'll get back to you within one business day and set a time for me to come out. The on-site estimate is free with no obligation, and it helps to have the floor's size and your flooring plans handy.
(442) 294-1117How a concrete floor job goes with us
I visit and give the estimate
After you call or send the form, I come out, look at the site and ask how you'll use the floor and what goes on top. Then we go over the estimate together, and you can ask as many questions as you like.
Ground work through the pour
I'm there with our crew from the ground work to the last pass of the trowel. It helps to have the room emptied and a path open for the concrete to come in, and we'll let you know ahead which day we're pouring.
We walk the floor with you
Once the floor is finished, we walk the job with you before we pack up, so you see the finish, the joints and the cleanup for yourself. We'll also go over what to keep off the slab while it cures.
Concrete floor questions from Ridgecrest homeowners
How much does a concrete floor cost in Ridgecrest?
An installed 4-inch concrete slab in California usually runs about $9 to $18 a square foot, labor and materials included. That's a statewide figure, not our price, and I'll give you your own number at the estimate. Our work is backed by our satisfaction guarantee.
Is it normal for a new concrete floor to crack?
Yes, some cracking is normal on any floor, even one that was well designed and built right, so a few cracks alone don't mean the job was done badly. Rebar, the steel set inside the slab, won't stop cracking, but when it's properly sized and placed it should keep cracks tight. Ask me how we'd place it for your floor.
How soon can I put flooring over a new concrete floor?
Not until the moisture inside the slab has dropped to an acceptable level, and being hard enough to walk on isn't the same as being dry. If tile, carpet or a coating goes down too soon, that moisture can collect underneath and cause buckling, blistering, loose adhesive or mold, so build drying time into your schedule before booking the flooring crew.
Who can pour a concrete floor in California?
A contractor holding the state's concrete license, the class California calls C-8, which covers forming, pouring, placing and finishing flat concrete. Even a small job under $1,000 needs a licensed contractor if it requires any permit or the person doing it hires workers.